The Nardi FCI/G Disc Harrow is available in working widths of between 2.30 and 5.50 metres. It is suitable for use on tractors of up to 300hp dependent on model.

Working Widths

The Nardi FCI/G Disc Harrow is a heavy duty offset disc harrow. The range consists of two models, the FCI 230G and the FCI 280G, they are available in the following working widths:

Nardi FCI 230G

• 2.30 metres
• 2.50 metres
• 2.75 metres
• 2.97 metres
• 3.20 metres
• 3.65 metres
• 4.10 metres
• 4.55 metres
• 5.00 metres
• 5.50 metres

Nardi FCI 280G

• 2.50 metres
• 2.75 metres
• 3.00 metres
• 3.30 metres
• 3.55 metres
• 3.85 metres
• 4.10 metres
• 4.40 metres
• 4.68 metres
• 4.96 metres
• 5.50 metres

Construction

All models benefit from 660mm diameter discs as standard. There is an option to have either cutaway or plain discs on all models. In addition, it is also possible to have a combination of the two disc options. With the FCI/G range tapered double roller bearings support the disc axles. Dependent on working width, either 8 or 12 bearing supports are fitted. Additionally two different disc spacing options are also available.

Working depth is set by the wheels on all models within the range. The lifting and lowering of the transport wheels is hydraulically controlled. In addition, the angling of the two offset disc gangs is also controlled hydraulically. All models also fold hydraulically to 2.5 metres for road transport. In addition, fully adjustable disc scrapers are also fitted to all models. As a result the discs will run cleaning regardless of ground conditions.

Power Requirements

As a result of their heavyweight construction, the FCI/G range will always penetrate into the ground, even in the toughest of conditions. With weights ranging between 2200kg and 3575kg a minimum power requirement of 90hp exists for the smallest model up to a maximum of 300hp for the largest models in the range.

To download a copy of the Nardi FCI/G Disc Harrow brochure, please click here.