GL&D Hercules C125 Universal Woodchipper

Details

The GL&D Hercules C125 Universal Woodchipper is a tractor mounted machine capable of handling material up to 125mm. A tractor of at least 25hp is required.

Additional information

Ask a Question

GL&D Hercules C125 Universal Woodchipper

Details

The GL&D Hercules C125 Universal Woodchipper is a tractor mounted machine capable of handling material up to 125mm. A tractor of at least 25hp is required.

Full Details

The GL&D Hercules C125 Universal Woodchipper is a 3 point linkage mounted chipper capable of handling material up to 125mm.

Chipping is carried out by a 590mm diameter flywheel fitted with two replaceable blades. Material is fed into the flywheel by means of one hydraulically powered toothed roller. Power for these is provided by the machines on board hydraulic system. As a result, no hydraulic connections are needed to the tractor, only a 540rpm PTO is required.

The feed of material into the flywheel is controlled by a “No-Stress” system. This monitors the speed of the flywheel to keep it between two pre-set parameters. As a result, if it’s speed drops below the lower setting, feed to the flywheel is stopped. A 12 volt electrical supply is also required for this system to work.

In addition, both Category I and II lift arm connections are provided. As a result this allows the machine to be used with any tractor of 25hp and above. The machine also has a weight of approximately 450kg.

Outputs of between 8 & 16 cubic metres per hour are possible with the C125 Universal.

For more details on the GL&D Hercules C125 Universal Woodchipper, please visit the GL&D website by clicking here

GL&D are exclusively distributed by Agri Market Insight and Access Ltd in the UK and Ireland. Please feel free to contact our helpful team if you have any questions by clicking here.