GL&D Galaxi C155DT Woodchipper

Details

The GL&D Galaxi C155DT Woodchipper is a tractor mounted chipper with a maximum capacity of 155mm. It requires a tractor with at least 25hp and also a 12 volt electrical supply.

Full Details

The GL&D Galaxi C155DT Woodchipper is a 3 point linkage mounted chipper capable of handling material up to 155mm.

Chipping is carried out by a 610mm diameter flywheel fitted with four replaceable blades. Material is fed into the flywheel by means of twin hydraulically powered rollers. Power for these is provided by the machines on board hydraulic system. As a result, no hydraulic connections are needed to the tractor, only a 540rpm PTO is required.

In addition, the feed of material into the flywheel is controlled by a “No-Stress” system. This monitors the speed of the flywheel to keep it between two pre-set parameters. As a result, if it’s speed drops below the lower setting, feed to the flywheel is stopped. A 12 volt electrical supply is also required for this system to work.

In addition, both Category I and II lift arm connections are provided allowing the machine to be used with any tractor of 25hp and above.

Outputs of between 10 & 20 cubic metres per hour are possible with the C155DT

For more details on the GL&D Galaxi C155DT Woodchipper, please visit the GL&D website by clicking here

GL&D are exclusively distributed by Agri Market Insight and Access Ltd in the UK and Ireland. Please feel free to contact our helpful team if you have any questions by clicking here.

Additional information

GL&D Galaxi C155DT Woodchipper

Details

The GL&D Galaxi C155DT Woodchipper is a tractor mounted chipper with a maximum capacity of 155mm. It requires a tractor with at least 25hp and also a 12 volt electrical supply.

Ask a Question