GL&D Fusion M155DS Woodchipper

Details

The GL&D Fusion M152DS Woodchipper is a tractor mounted chipper with a maximum capacity of 155mm. It requires a tractor with at least 35hp and also a 12 volt electrical supply.

Additional information

Ask a Question

GL&D Fusion M155DS Woodchipper

Details

The GL&D Fusion M152DS Woodchipper is a tractor mounted chipper with a maximum capacity of 155mm. It requires a tractor with at least 35hp and also a 12 volt electrical supply.

Full Details

The GL&D Fusion M155DS Woodchipper is a 3 point linkage mounted chipper capable of handling material up to 155mm.

Chipping is carried out by a 670mm diameter flywheel fitted with four replaceable blades. Material is fed into the flywheel by means of a hydraulically powered roller and also a pintle belt. Power for these is provided by the machines on board hydraulic system. As a result, no hydraulic connections are needed to the tractor, only a 540rpm PTO is required.

The feed of material into the flywheel is controlled by a “No-Stress” system. This monitors the speed of the flywheel to keep it between two pre-set parameters. As a result, if it’s speed drops below the lower setting, feed to the flywheel is stopped. A 12 volt electrical supply is also required for this system to work.

In addition, both Category I and II lift arm connections are provided allowing the machine to be used with any tractor of 35hp and above.

Outputs of between 14 & 24 cubic metres per hour are possible with the M155DS.

For more details on the GL&D Fusion M155DS Woodchipper, please visit the GL&D website by clicking here

GL&D are exclusively distributed by Agri Market Insight and Access Ltd in the UK and Ireland. Please feel free to contact our helpful team if you have any questions by clicking here.