Compost Turner CMC-ST-200

Category:

Details

The typical tractor pulled compost turner forms as much part of Compost Systems

Additional information

Ask a Question

Compost Turner CMC-ST-200

Category:

Details

The typical tractor pulled compost turner forms as much part of Compost Systems

Full Details

The supply package comprises the entire steel structure, including pre-cut sheet metal parts and structural tubes, all cut to size, plus all purchased parts, such as gears, tyres, axles, drive shafts, hydraulic cylinders and hydraulic hosing. Only the rotor is pre assembled due to manufacturing reasons. This means all attachment parts, such as tool holders and rotor shafts, are fitted to the rotor, but welded at specific points only. The purchaser also finishes welding the rotor. The components are supplied with extremely comprehensive installation instructions. Requirements for the vehicle: 25 HP engine power and super crawler mode or Vario gears must be featured, so that very slow speeds of around 200 metres per hour can be achieved. A double action hydraulic connection should also feature on the tractor rear. Easy running rotor It’s not only us that thinks so, but users also report back to us amazed how smoothly the machine rakes the compost heaps. We managed to record a reduction of power requirements of about 20% during field trials. However, if the pile is larger or the raw material fresher, savings may even be much greater since the new rotating drum can overcome considerably larger piles than its predecessor. Users tell us that a lower power take off speed is required, meaning up to 20% less fuel is consumed. Conical tunnel If you look more closely, you’ll notice the rotor cover for the new generation opens up to the back. This is no quirk of the design. It allows us to ensure that the material moves freely for longer. This provides the rotor with more freedom of movement, e enabling it to run more smoothly. As a result, we save power and provide greater turning performance, because the material, especially long grass or straw, does not fall back into the rotor section and does not need to be turned over again. Concrete counterweight A counterweight only needs to be heavy, but there is no requirement for it to be thick or ugly. As a result, the tunnel design is also applied to the concrete counterweight. Wear Hammers, runners, edges, material stress Thanks to careful selection of materials and craftsmanship, the facts speak for themselves. We have managed to reduce wear significantly with the new design. Structural design Thanks to modern 3D design engineering, undesired points of breakage are identified before a prototype is even built. Torsion resistance, ultimate load and material thickness at the right points. This is where experience and state of the art engineering work in unison. The machine has not become lighter, but it has become more stable and powerful. Seeing as some tractors are twice as big as they were 20 years ago, it does not really matter if we take on double the load compared to before. That’s why a more robust machine has also been built to meet new requirements. Tractor requirements CMC – ST – 230: from 35 h p CMC – ST – 300: from 70 hp CMC – ST – 350: from 100 hp Sl ow speeds of around 200 meter per hour. 540 rpm s on Cardan shaft 2 double hydraulic valves.

CMC are exclusively distributors by Agri Market Insight and Access Ltd in the UK and Ireland. Please feel free to contact our helpful team if you have any questions, by clicking here.Tractor-pulled compost turners | Compost Systems (compost-systems.com)